date stringlengths 10 10 | nb_tokens int64 60 629k | text_size int64 234 1.02M | content stringlengths 234 1.02M |
|---|---|---|---|
2021/03/08 | 749 | 2,704 | <issue_start>username_0: I am building a 3D printer from scratch, the bed will only move on Z and the head will stay at the top of the printer and move X and Y.
How do I modify the Marlin firmware to have the bed lower as it prints instead of lift like most printers.<issue_comment>username_1: To understand normal comm... |
2021/03/11 | 1,985 | 7,485 | <issue_start>username_0: I'm still fairly new to 3D printing; got my Ender 3 V2 for Christmas last year. Recently the tension arm in the stock extruder snapped, so I bought and installed an all-aluminum replacement. My first successful(ish) print since installing it lasted two to three hours before I noticed the filame... |
2021/03/13 | 572 | 2,191 | <issue_start>username_0: Just received my new Ender 3 v2. When using the Auto Home feature, the Y-axis motor drives the bed as far back as possible then the motor grinds for about 10-15 seconds. The Y-axis limit switch is not being depressed and the limit stop is about .5 inches away from the switch. The control unit l... |
2021/03/13 | 679 | 2,596 | <issue_start>username_0: So I was thinking of using a closed-loop motor in my 3D printer for better accuracy and high-speed printing without losing steps. I have analyzed options available including just tweaking stepper current and firmware changes to prevent step losses but I want to find the best way to do it with e... |
2021/03/14 | 1,281 | 4,293 | <issue_start>username_0: I uploaded a 3D object for [this project](https://lerdagiovanni.wixsite.com/kauda/stl-files) to Fusion 360 and printed it out straightforward:
[](https://i.stack.imgur.com/BLeFU.png)
Yet its middle hole is too small for the s... |
2021/03/15 | 2,535 | 8,600 | <issue_start>username_0: I'm using Cura and it removes my holes and deletes sections of the print and disconnects parts. In Blender it looks as it should be, as I designed it. I know there are a few mishaps inside (not manifold) but is there a way to fill in everything on the inside. I only care about the externally fa... |
2021/03/16 | 2,146 | 7,294 | <issue_start>username_0: Prusa MK3 heatbed power cable shorted out (on the Einsy side) and it looks like I need to replace the Einsy. Should I replace the heatbed too? I don’t know electronics well and am worried I will just fry a new Einsy.
Heatbed end:
[![Heatbed end](https://i.stack.imgur.com/1pA7t.jpg "Heatbed end... |
2021/03/17 | 1,093 | 4,367 | <issue_start>username_0: I have just bought my own 3D printer. However, I am now reading that there may be some safety risks to 3D printing. I will be taking some precautions, such as buying an enclosed 3D printer (the FlashForge Adventurer 3), using PLA instead of ABS, and putting my 3D printer in my garage. However, ... |
2021/03/17 | 1,475 | 5,655 | <issue_start>username_0: I have a [Flex3Drive](https://flex3drive.com/) remote-direct-drive extruder I bought for my Ender 3 (with the original extruder motor), and I'm pretty happy with it except for abysmal retraction performance due to the 40:1 reduction, which requires the motor to turn about 480° to retract just 1... |
2021/03/18 | 1,255 | 4,789 | <issue_start>username_0: So basically I've been having a problem with my Micro+.
It will not level / calibrate itself and I can't fix it. The reason I'm here is that I've been using Cura, and somehow it destroyed my bed. (See image)
[](https://i.stack.imgur.... |
2021/03/20 | 724 | 3,012 | <issue_start>username_0: I want to build a mini CNC machine and need some lead screws. I was wondering I can simply 3D print some. There are a few 3D models out there but I want to know if printing it in PLA+ has enough strength for a small CNC. Is it possible?<issue_comment>username_1: Is it possible? Yes. Is it advis... |
2021/03/21 | 525 | 2,076 | <issue_start>username_0: Being new to 3D printing, I started using Cura (which came with my Ender 3v2) to slice models I found on Thingiverse. I know that there are other slicers and have heard positive things about PrusaSlicer.
I know that settings will have different names, but I am asking more about the setup. What... |
2021/03/21 | 598 | 2,271 | <issue_start>username_0: I am trying to print a fairly simple object yet I keep getting the same issue.
As you can see in the picture the print quality is bad with all the blobs on the vertical part of the print.
I have leveled the bed many times and I keep getting this issue. I have also calibrated the E-steps. I ha... |
2021/03/21 | 832 | 3,115 | <issue_start>username_0: I have just set up my new 3D printer. However, the build plate keeps slipping while printing. I tried to use binder clips to keep the plate in place, but this makes the build plate unlevel, messing up my prints. What are some other ways to prevent the build plate from slipping. I was considerin... |
2021/03/21 | 1,019 | 3,587 | <issue_start>username_0: So I have been having an ongoing problem with my printer that I just can't solve. I don't usually ask the questions on stack exchanges until my problem gets unsolvable. Unfortunately like this one
**Printer**: Creality Ender 3 V2
**Current Board**: [Creality v4.2.7 (Silent Motor)](https://rad... |
2021/03/24 | 1,735 | 7,327 | <issue_start>username_0: I have read that if I disconnect OctoPrint when printing, the print will stop. Since I thought the advantage of OctoPrint over, say, printing from Cura, was that it didn't tie up the computer while the print was taking place, what are the advantages of OctoPrint?<issue_comment>username_1: The b... |
2021/03/26 | 1,159 | 3,913 | <issue_start>username_0: I've updated my Ender 3 with V4.2.7 mainboard, BLTouch and 400XL kit (extends the capabilities of your Creality Ender 3 3D Printer to a 400 mm X, 400 mm Y and a 500 mm Z printing platform). Now I need to update the firmware. YouTube did not provide any help: i.e.: out of date, so cryptic as to ... |
2021/03/26 | 554 | 2,097 | <issue_start>username_0: I'm new to the 3D printing world and got my first Ender 3 (with the 32-bit controller board).
I have a problem with every single print. I've upgraded to the newest Marlin firmware, did the mesh leveling then started printing and fix the Z bed option in "Tune - Z bed" during the print (so the f... |
2021/03/29 | 13,859 | 31,432 | <issue_start>username_0: I have just acquired my first 3D printer, a BIQU B1. Overall I'm quite pleased with the printing results but I'm having minor defects on the Benchy test. I'm not sure what the problem is, but I guess it's related to the overhang and maybe vibrations.
My print settings are:
* Software: Ultimak... |
2021/03/29 | 979 | 3,547 | <issue_start>username_0: I am designing some parts that should modular fit together. I am currently exploring a Lego-like design with octagonal holes and cylindrical pins.
I notice that (depending on the amount of clearance) that the fit is initially tight (to the extent that the pieces are very difficult to remove fr... |
2021/03/29 | 950 | 3,462 | <issue_start>username_0: I'd like to buy a 3D printer and use it as a "platform" for an **external** optical sensor. The idea is to mount an optical sensor on the Z-axis and to put a workpiece on the X-Y table. Now, I'd like to move the sensor across the workpiece and trigger the measurement of the optical sensor. Henc... |
2021/03/31 | 494 | 1,937 | <issue_start>username_0: I've just received my Ender 3v2 and tried multiple SD cards, all have been formatted to FAT32 with no luck. Under the Print selection, all I get is the back button. I looked and I have the V4.2.2 and the firmware is up to date, Showing 1.0.2 unless this is not right and this is why I'm having t... |
2021/03/31 | 1,712 | 6,534 | <issue_start>username_0: I was thinking about [this question](https://lifehacks.stackexchange.com/questions/24627/how-to-paint-a-circle-pattern-on-a-big-piece-of-paper) and thought of maybe printing a pattern-drawing roller painter.
The question is: is it possible to print with an ink absorbing material that could mak... |
2021/03/31 | 636 | 2,610 | <issue_start>username_0: I recently got an Ender 3 Pro for my birthday, and I am having some problems with elephant's foot (as the title suggests). I have tried several fixes; lowering the print speed, changing the print micron size (quality) in my slicer, and I have also tried the masking tape trick (it definitely doe... |
2021/04/01 | 896 | 3,599 | <issue_start>username_0: Suddenly my prints start having small strings and I'm not sure what to do to eliminate them.
I have already tried to clean the filament tube, cleaned up the nozzle, and played with various retraction settings. Nothing seems to work and I still see these small strings.
[ as it ... |
2021/04/13 | 734 | 2,610 | <issue_start>username_0: I bought an Ender 3 v2 in January 2021 for my second printer. I have had an Ender 3 for two years and love the quality it prints. This new printer has been plagued with issues since day one. Creality sent me a new mainboard and fan due to issues. Even since then my printer will still not print ... |
2021/04/14 | 1,185 | 4,714 | <issue_start>username_0: Ive been experimenting will multiple color filament but the colors a more or less blended. Is there are filament that goes from one color directly to another without having transition color ex. red to green immediately.
I've been tinkering with [Filament Hub Filament](https://www.filamenthub.c... |
2021/04/16 | 547 | 1,944 | <issue_start>username_0: I recently bought a Titan Aero hot end which came with a 24 V 30 W heater cartridge from E3D. I'd like to use this but the cable length is only 1 meter long and I need it to be 2 meters. The ends terminate with prong connections and there is no polarity to the prongs. How can I safely extend th... |
2021/04/17 | 1,020 | 3,346 | <issue_start>username_0: My custom 3D printer prints everything inverted. I guess this is a homing problem as the motor moves in correct direction.
In Pronterface,
* if I press -Y — bed moves forward (towards the Y endstop)
* if I press +Y — bed moves backward (away from Y endstop)
* if I press -X — hotend moves left... |
2021/04/19 | 1,760 | 5,602 | <issue_start>username_0: Let's say I've made a 3D scan of my face and managed to get that into FreeCAD. How might I then create an object (it's a mask, okay?) that conforms to the shape of my face, with a given thickness, such that I can export and 3D-print that part only?
So if I printed it, it would fit over my face... |
2021/04/19 | 625 | 2,243 | <issue_start>username_0: I have a problem in regards to filament jam, however I don't think that my case is any related to the extruder nozzle.
After 30 to 40 minutes printing my filament bends and get stuck on the tube entrance.
To print a nut wheel which comes as a demo file, I had to repeat the operation 4 times, an... |
2021/04/19 | 462 | 1,675 | <issue_start>username_0: I am getting this error when I try to enable the Z2 driver for MKS Gen L V2.1
Could anyone help?
Error "TMC2208 or TMC2209 on Z2 requires Z2\_HARDWARE\_SERIAL or Z2\_SERIAL\_(RX|TX)\_PIN.<issue_comment>username_1: Something is stopping the filament from going down the tube 30 to 40 min. after ... |
2021/04/21 | 1,156 | 4,450 | <issue_start>username_0: I am currently trying to print a company logo on another part I have printed in a different colour. To try and maximise the strength of the part, I need to print the part on a different orientation to what I intend on printing the logo on. As a result I need to in a sense re-adhere the part to ... |
2021/04/22 | 734 | 2,593 | <issue_start>username_0: I've recently switched to PETG , and I'm using Cura as slicer and Ender 3 as printer.
I'm printing a model which Cura declares to be **35 g**, but if I weigh the printed model it weighs **23 g**.
I'm printing with just 1 line of skirt, so its weight is negligible on total weight.
I've replace... |
2021/04/23 | 919 | 3,253 | <issue_start>username_0: I was wondering the other day why don't all three motors move at the same time? Don't normal paper printers move 2 motors at a time? they're 2D printers. It makes sense if a 3D printer really does print with *all* three motors moving. Won't it also be more efficient if they do 3D print in all a... |
2021/04/23 | 903 | 3,191 | <issue_start>username_0: We're thinking of buying a PETG-powered printer. When researching printers available on the market, there are machines with a 100 microns. I was wondering if there are machines with a 50 microns or close to 50 micros? Otherwise, why not?<issue_comment>username_1: The Z axis moves between each l... |
2021/04/23 | 748 | 3,015 | <issue_start>username_0: Every time I start a print, midway during printing, my printer starts to under extrude.
I tried lots of different models every time the problem occurs.
What should I do about this?<issue_comment>username_1: If everything is stock on the machine and all other setting are properly configured, t... |
2021/04/24 | 521 | 1,769 | <issue_start>username_0: Does anybody if the Anycube Mega X comes with a nozzle for 1.75 mm filaments or is it 2.85 mm?
I saw online that it works with 1.75 mm filaments but the Cura settings given by the manufacturer had 2.85 mm.
I should mention that using a 1.75 mm filament works BUT my designs have clear under-ext... |
2021/04/25 | 1,127 | 4,202 | <issue_start>username_0: I'm trying to print the following model:
[](https://i.stack.imgur.com/b8cSN.jpg)
[](https://i.stack.imgur.com/HGgi3.jpg)
I'm using [Simplify3d](https://www.simplify3d.com/) to print the model with the... |
2021/04/26 | 534 | 2,278 | <issue_start>username_0: Every now and then I'll have a problem with layer shift. Solving this is a separate issue, but it occurred to me: most of the time when this happens I notice right away because of the noise. What if there were an easy to to pause the print, re-home the X/Y axis (not Z), and then resume. I'd onl... |
2021/04/28 | 883 | 3,383 | <issue_start>username_0: My Ender 5 Plus (original) does not perform leveling.
After the self-leveling command, the Z axis only descends.
I have already exchanged the BLTouch three times, and the problem remains unchanged.
I bought my E5P in December, in America, to bring it to Brazil, I had to completely dismantle i... |
2021/04/30 | 577 | 2,322 | <issue_start>username_0: Any hints or suggestions (filament type? suggested settings? model sources?) for 3D printing minis to use in Dungeons & Dragons?
I've done a couple where the support structures were difficult to break off without breaking off a hand or something.
I have a Lulzbot Mini (1), single-extruder if ... |
2021/05/01 | 791 | 2,809 | <issue_start>username_0: All of my completed prints come out with rough edges. What are some methods for removing rough edges from 3D prints? Also, are there any ways to reduce rough edges on prints? For reference, I use a FlashForge Adventurer 3 and PLA filament.<issue_comment>username_1: 1. To remove unwanted residua... |
2021/05/01 | 862 | 3,075 | <issue_start>username_0: When I first got my 3D printer (a FlashForge Adventurer 3), it came with a sample pack of filament. With this filament, I was able to use skirts for my first layer. When the sample filament ran out, I switched to Hatchbox PLA filament. For some reason, I cannot use skirts with the Hatchbox fila... |
2021/05/03 | 1,116 | 3,989 | <issue_start>username_0: This issue just started recently; I am not sure if it is because of the specific part I am printing or whether something on the printer is going bad. Up until now, I have been printing all kinds of parts with no problems whatsoever.
I am printing a hollow sphere whose walls have fill paths tha... |
2021/05/08 | 792 | 2,748 | <issue_start>username_0: I’ve got this proximity sensor which is a 5 V, it doesn’t say it can be used over 5 V. Can I use a buck converter or is it possible to wire it up direct to a 5 V source on the Ender 3 V2?
What I don’t understand is where to wire it direct to 5 V on the printer or if I use a buck converter then... |
2021/05/10 | 548 | 2,042 | <issue_start>username_0: Today I ran into an issue with the filament not sticking to the build plate. However, the strange part is, that this only happens with one filament color (both PLA, khaki, black works just fine) and only in the main print. The test line on the side of the bed and the brim all stick without a pr... |
2021/05/12 | 3,213 | 7,683 | <issue_start>username_0: **My setup**
* Ender 3
* Creality glass bed
* Creality 3D BL Touch auto bed levelling kit v1
* Creality 3D silent mainboard v4.2.7
* OctoPrint running on a Raspberry Pi 4 connected over USB (with the 5 V pin covered with a piece of tape to prevent powering the mainboard)
**Problem**
Despite ... |
2021/05/12 | 709 | 2,641 | <issue_start>username_0: Sorry, I'm new in 3D printing and modeling and I need help.
I bought a 3D model with a hollow part of the body that doesn't print on my printer normally (with very high resolution (layer is 0.12 mm, the nozzle is 0.4 mm) because the walls are very thin). I tried to make it as a solid in MeshMi... |
2021/05/13 | 3,171 | 12,303 | <issue_start>username_0: In Prusa i3 clones the Z axis is often problematic. Mechanically unsynchronized dual Z axises which are driven by the same stepper driver easily misalign. Using only one Z motor makes the whole gantry sag on one side. And Z lead screws that aren't perfectly straight lead to z wobble.
The other... |
2021/05/13 | 251 | 868 | <issue_start>username_0: I am printing ABS on an Ender 3 printer at a temperature of 240 °C on the nozzle and 110 °C on the bed. I am getting the following result:
[](https://i.stack.imgur.com/FnLuQ.jpg)
Is there any way I can fix this?<issue_comment... |
2021/05/16 | 1,255 | 4,858 | <issue_start>username_0: I have a BLTouch clone (3DTouch) on my printer (Artillery Sidewinder X1). I installed it on the printer ages ago and has been working fine since. Recently, I did a BTT smart filament sensor upgrade.
I updated and edited both the Marlin firmware and the MKS TFT28 screen firmware to get it to wo... |
2021/05/16 | 900 | 3,411 | <issue_start>username_0: I picked up some no-name "silk" PLA in a multi color pack as part of a project where I needed some additional distinct colors and structural properties didn't matter, but now I'm playing with the excess I'm not using for that, and its behavior is really weird. On overhangs with detail on the do... |
2021/05/17 | 365 | 1,354 | <issue_start>username_0: I broke 2 keys (i.e. left ctrl, enter) on my Asus UX31A laptop and it seems that this model is too old to find replacement keys.
Is there any way I can find a 3D model of the needed keys to have them 3D printed?
I do not have a printer nor I have any experience in this field.
What I need is e... |
2021/05/18 | 1,164 | 4,458 | <issue_start>username_0: I have a 3D printer, which wasn't used for a longer time. There is a nozzle, but don't know what diameter is it. I used several widths - from 0.2 to 0.8, switched them depending on my needs, but don't remember which one was used lately.
The nozzle is a little bit worn down, so the diameter on t... |
2021/05/21 | 684 | 2,393 | <issue_start>username_0: I've observed printing PETG that the primary if not the only reason for using a high bed temperature seems to be preventing the bed from acting as a huge heat sink and rapidly cooling the initial layers such that they don't bond well to each other. In particulat, the heat is not needed for adhe... |
2021/05/22 | 622 | 2,370 | <issue_start>username_0: I’m just getting my feet wet with 3D printing, and I’ve had a few prints do this. Curious if anyone has any ideas for me that might help clean this up? (I don’t really have anyone in my personal circle who can help out, so hoping this community can :) )
Edit 5/23
The first layer of the print i... |
2021/05/22 | 1,524 | 6,049 | <issue_start>username_0: I've had my Ender 3 for almost three weeks, gone through about a kilogram of PLA filament (printing a mix of upgrade parts for the Ender 3 and stuff I actually want to use) and made one PETG object, generally with good results.
I've noticed however, as seems relatively common (per YouTubers, a... |
2021/05/24 | 1,114 | 4,252 | <issue_start>username_0: I am trying to print a tank to be used with my RC engine. The material that I have to use needs to have the following properties:
* It needs to be possible to seal the final print so that it is not leaking any fluid
* It needs to resist methanol, nitromethane (a solvent like Acetone) and lubri... |
2021/05/26 | 674 | 2,471 | <issue_start>username_0: What fan speed should I use with PLA? Do I need to manually set the fan speed in ‘Control’?
Also, on the filament cartridge Bed Temp is listed: *"No heat/60-80 °C"*. Does this mean heating the bed is optional?<issue_comment>username_1: Most commercial blow-molded fuel tanks for model airplane ... |
2021/05/27 | 649 | 2,133 | <issue_start>username_0: I printed a lot of models in last month. I spent 2 kg filament in total. I want to know how many hours have been passed while printing. As far as I read, 1 kg PLA (1.75 mm) is about 110 meters long. My default print speed is 70 mm/s. The nozzle diameter is 0.4 mm. The nozzle multiplier in the s... |
2021/05/31 | 611 | 2,100 | <issue_start>username_0: I want to get my Ender 5 plus to print at 300 °C. As such, I've edited the firmware and increased the `HEATER_0_MAXTEMP` to 315 °C.
In my slicer, I can slice and print at 300 °C, however, I cannot manually adjust the temperature on the LCD screen past the stock setting of 260 °C.
Any help in ... |
2021/06/01 | 586 | 2,073 | <issue_start>username_0: The problem with my Anet E12 should be on USB connection itself.
1. If powered down, the board still gets power from USB
2. If board is resett, USB will still connect
3. Still works on SD; seem like most part not damage.
What cause the problem? Where to check first? How to fix it?
Note: This ... |
2021/06/04 | 773 | 2,891 | <issue_start>username_0: So I bought this printer three days ago as a way to dip my toes into the 3D printing world, and it was working great at first. But at some point, the ABL procedure started behaving oddly: Instead of moving down to touch each corner of the printing bed, it's now only doing so for one corner, the... |
2021/06/04 | 509 | 1,809 | <issue_start>username_0: Windows has its 3D Builder software which upon importing an image, converts it to a heightmap of the image, aka turning it to a 3D model that can be saved as an stl.
Does Linux have software with similar properties that takes a black and white image and turning it into a 3D heightmap model?<is... |
2021/06/05 | 512 | 1,795 | <issue_start>username_0: I have an UP! mini and I am using the UP Studio and ABS 1.75 mm.
My prints are always stuck to the rafts and are impossible to remove without destroying the print.
I've had a look at the settings on the Up Studio but I don't know which ones to change to improve the situation.<issue_comment>us... |
2021/06/06 | 771 | 2,593 | <issue_start>username_0: I have noticed major watches watch brands do not seem to offer manuals to 3D print your own parts.
Is there a reason for this?
I would assume in this day and age, with [watch repair a dying profession](https://www.careeronestop.org/Toolkit/Careers/Occupations/occupation-profile.aspx?keyword=W... |
2021/06/06 | 1,440 | 5,567 | <issue_start>username_0: I am printing this piece using a 0.4 mm nozzle. It happens that the piece on the chin does not print properly.
I have already tried the tree mode supports, touching the plate and in all the places but the same thing happens.
I include photos of my configuration in Cura.
[.
Therefore, I've considered conver... |
2021/06/11 | 398 | 1,585 | <issue_start>username_0: I just assembled Ender 3 and noticed that the X-axis movement doesn't correspond to the commands. When I make it move 1 mm with the encoder it moves 16 mm. Everything is in the "out of the box" configuration.
The current steps/mm for the X-axis read (from the display) 80 steps/mm.
Am I suppos... |
2021/06/11 | 581 | 1,947 | <issue_start>username_0: I have recently started printing with Polymaker's PolyMax PETG on my Ender 3 v2. I have not been able to get the layer adhesion anywhere near as strong as it should be. I would guess it is around 20-25 % of the strength in the XY direction. The parts snap easily along the layer lines under load... |
2021/06/14 | 839 | 2,847 | <issue_start>username_0: My Tevo Flash works well. Right now, I'm trying to print a thin, disc-like part on supports. The 3 perimeters at the edge of the disc are OK. The dense fill zigzag pattern makes many U-turns near the perimeter. It all looks OK in Simplify3D. But in the printed part, in several spots, the zigzag... |
2021/06/15 | 1,847 | 7,070 | <issue_start>username_0: 3D printer use stepper motors for moving print head and extruding filament. They need to have good torque and resolution.
Microstepping improves resolution as much as 32 fold (I think) but reduces torque the higher you microstep.
So...
1. Why not rotate the motor with microstepping at high R... |
2021/06/15 | 1,253 | 4,664 | <issue_start>username_0: My first attempt to print in ABS has been an unmitigated disaster, and I could do with some advice before I try again.
I've been trying to print a [Bean Hopper Extension for Melitta Barista TS Smart](https://www.thingiverse.com/thing:4067324) coffee machine, but every time the layers separate,... |
2021/06/17 | 1,844 | 6,441 | <issue_start>username_0: I have a Tevo Flash. Normally, I don't care about perpendicularity with respect to the table. But now I have a 5" disc on a ball bearing, held by a 3D printed tube with a flat bottom. If the tube's axis is not 100 % perpendicular to the bottom, the disc, when spun, wobbles at the edge: ~1/8".
... |
2021/06/17 | 1,774 | 6,661 | <issue_start>username_0: I've built a custom machine based on the AM8 (Anet A8 upgrade). I've got an E3D V6 clone hotend in, seems like a decent clone. I've replaced the heat break, heat block, and nozzle several times but after a given period it seems like filament leaks up the heat break. The heat break and nozzle ar... |
2021/06/17 | 672 | 2,671 | <issue_start>username_0: I am looking to print an HTD Timing Belt pulley to be used in a laboratory setting that can get *very* cold for extended periods of time. By "very cold" I mean adjacent metal chambers get cooled with liquid nitrogen to lower than -200 °C. For the purposes of having a threshold temperature toler... |
2021/06/18 | 477 | 1,747 | <issue_start>username_0: My BLTouch was working great. Until one day, it just started showing the right side as being high on every read.
I've tried leveling many times manually and with the BLTouch. But every time I use the bed visualizer, it shows high on the right. I've even rotated the glass build plate with the s... |
2021/06/18 | 513 | 2,221 | <issue_start>username_0: I´ve been using my Ender 3 Pro for almost 1 year now. Always using the provided SD card. For a couple of days, the printed does not read any new file that I load to the SD card, but it does with the older files (and it then prints correctly as well).
I tried deleting some old files that I don'... |
2021/06/18 | 469 | 2,068 | <issue_start>username_0: Usually the hardness of the material is considered primary for nozzles used with abrasive filaments. Has friction between between nozzle material and abrasive filaments been considered? It seems that friction as well as hardness would play a roll in how long the nozzle lasts. Perhaps, this is c... |
2021/06/18 | 728 | 2,602 | <issue_start>username_0: Is there any convention on how to mark an all metal hotend to distinguish it from a hotend with a PTFE tube in the heatbreak? Once assembled for a German Riprap 3D printer, they look exactly the same on the outside. I'm trying to decide on a way of marking them to indicate the difference.
Hote... |
2021/06/18 | 1,558 | 5,747 | <issue_start>username_0: I’m getting nothing but jams with a new BCN3D Sigma R19 printer, printing PLA at 195 °C, two brands (BCN’s own brand and Monoprice orange). 6.5 mm retraction, as used in BCN’s PLA profile. Using their fork of Cura. Full enclosure, but it gets maybe to 32 °C inside, just warm. It prints fine for... |
2021/06/18 | 792 | 3,076 | <issue_start>username_0: Having started with an Ender 3, it just seemed natural to me that the heatbreak should not be load-bearing; Creality's stock hotend has 2 bolts holding the heat block to the heat sink, which of course waste some heating power and increase the cooling needed to avoid heat creep, but serve the im... |
2021/06/19 | 430 | 1,675 | <issue_start>username_0: I am pretty sure that sanding makes a lot of microplastics, so it would be nice to collect the dust, and melt it to got a blob of plastic again instead of millions of tiny particles. What is the best way for collecting it, do you use any dust extractor, or are there different techniques like sa... |
2021/06/21 | 2,206 | 8,062 | <issue_start>username_0: I'm printing a Soma cube I found on Thingiverse -- it's a puzzle toy I remember from the early 1970s, and the kind of thing that ought to be really easy-peasy to print. Each of the seven pieces is made of four cubes (or three for one piece) joined face to face in every possible combination, so ... |
2021/06/22 | 713 | 2,770 | <issue_start>username_0: I didn't have any printer-related problem for the past 6 months, but now all of a sudden my Prusa MK3S stopped extruding during printing.
This is very strange as I can easily load\unload filament and control the step motor via Settings\Move axis\Extruder. When I did so, the filament got extrud... |
2021/06/25 | 590 | 2,492 | <issue_start>username_0: A Bowden tube extruder (like the stock one on an Ender 3) is known to have issues with printing the most flexible TPU, and with filaments that (either due to composition or condition) don't take well to too much retraction -- though the latter can be ameliorated somewhat with slicer settings. D... |
2021/06/28 | 594 | 2,371 | <issue_start>username_0: I have my print settings dialed into a real good spot, but there's one obstacle that's preventing them from coming out flawless; somehow, my print has "fuzz" everywhere. Not traditional stringing like you get from filament oozing while travelling from section to section, nor do I mean over-extr... |
2021/07/02 | 1,482 | 5,069 | <issue_start>username_0: I've got some sliced models that represent the **right**-side arms and legs of a robot. I'm really happy with how they printed, so now I'd like to print the **left**-side arms and legs.
I was thinking it would be pretty trivial to parse the G-code file using Python and change the value of all ... |
2021/07/03 | 352 | 1,158 | <issue_start>username_0: As you can see the left side of the edge came out jagged. The right side came out just fine. What happened to the left side?
I am using Ender 3 + BLTouch using Sunlu PLA+ with 200 °C hotend.
[](https://i.imgur.com/Ki7ZzQ4.jpg "Left side... |
2021/07/08 | 333 | 1,273 | <issue_start>username_0: Some time ago, I bought an Elegoo Mars 2 Pro, and I really liked the product. This is my first resin printer and I am very satisfied.
What has been bothering me a little is in relation to the slicer. When I slice an item, Chitubox shows 3 hour/20 g (consumption), but this does not converge, wh... |
2021/07/09 | 801 | 3,490 | <issue_start>username_0: I just noticed the other day that my Ender 3 is printing stuff a lot slower than it can, and realized when I was slicing a part that it's because the default "Wall Print Speed" is half the "Print Speed" even though "Infill Speed" is full speed. I can enter higher speeds, of course, but then Cur... |
2021/07/09 | 746 | 2,782 | <issue_start>username_0: When considering enclosures able to reach higher chamber temperatures, insulation is essential to keep the heater power low.
Typical insulation materials are not transparent: cork (fire retardant, good for the inner hot side), rock wool, styrofoam panels, aluminium insulating panels (aluminium... |